Engine Order

Telegraph

Communicate Wheelhouse to Engine Room

Learn More

Marine Throttle Twin Lever

Designed to enhance the wiping area

Horizontal 

Learn More

Shaft/Propeller

RPM System

Signal Convector and Digital Display

Learn More

Five Standard Size Available

  • Model  2.2T/107 : 2.2 gpm (0.5m3/hr)  –  (for Ships 400-1600 GT)      

  • Model  5T/107    : 5 gpm (1.1m3/hr)     –  (for Ships 1600-4000 GT)      

  • Model  11T/107  : 11 gpm (2.5m3/hr)    –  (for Ships 4000-15000 GT)      

  • Model  25T/107  : 25 gpm (5.7m3/hr)   –  (for Ships 150000 GT+ rigs)     

  • Model  45T/107  : 45 gpm (10.2m3/hr) –  (for Rigs and Larger Ships)     

BOSS Oil Water Separators -Specification

Specification 2.2 GPM 5 GPM 11 GPM 25 GPM 45 GPM
Height (inch/cm) 56 (142) 58(147) 77(195) 80(203) 85(216)
Width (inch/cm) 27 (69) 32(81) 39(99) 47(119) 54(137)
Depth (inch/cm) 42(106) 48 (121) 58 (147) 78 (198) 100 (254)
Dry Weight (lbs./kilogram) 480 (218) 775 (351) 1275 (578) 2475 (1123) 3875 (1758)
Wet Weight (lbs./kilogram) 660 (299) 1200 (544) 2225 (1009) 4695 (2130) 8580 (3892)
Capacity gpm/ M3/hr 2.2(0.5) 5 (1.1) 11(2.5) 25(5.7) 45(10.2)
Pipe connections In/Out ¾” – ½” 1” – ¾” 1” – ¾ ” 1 ½” – 1 ½” 2” – 1½”

ALL UNITS

Specification Value Advantage
IMO MEPC Compliance 107(49) Meets Latest Requirement
Expected Oil in Discharge
Water(independent tests)
Less than 3.2 PPM
by independent test
Far exceeds the required 15ppm
Great for the environment
Emulsion Removal Method High Capacity Filtration Simpler/more trouble free than membranes
Expected Filtration Media Life 1 year Extra long lasting without bypassing
Water Discharge Pressure  90Ft of Head Designed for any situation
Oil Discharge Pressure Makeup Water Pressure Determined by makeup water
Oil Discharge Valve Standard Check Valve Optional MOV where Positive Head
Control System Type Solid Circuit  Increased reliability – No PLC trouble
Control System Interface 6 dry contacts  Easy to interface with ship controls
Test PSIG 45 Quality Construction
Operating Temp Range 1-55 C Generally not affected by temperature
Max Free Oil Concentration 35% Large temporary slugs of oil up to 100%
Oil in Water Discharge with TPH <15 ppm Can be set to 1-15ppm
Single Phase Power Options 110/120vac
220vac
Any power option 1 phase
Three Phase Power Options 210/220vac
380/415vac
460/480vac
575/600vac
3 phase options to 600VAC
Frequency 50 or 60 Hz Either frequency no problem
Max Amperage  3.3-7.7 amps Recommend 15 amp circuit
Max Turbidity for Accurate TPH Reading 35 NTU standard High Turbidity Options Available
Design Negative Inlet Head (Ft/M)  12 ft./ 3 M High Lift 5 Meter Option Available
Level Sensor Conductance Highly Reliable- Trouble Free
Pump Centrifugal w SS
Housing
Highly Reliable – No emulsions created
pump on the discharge side of separator
Coalescing Media Polypropylene / HDPE Excellent Coalescing – Very Efficient
Vessel Metallurgy Carbon Steel Marine Coated
Coating Specification Epoxy/Urethane Highest Quality Coating
Skid / Drip Pan Standard without skid Skid or Drip Pan Optional
Piping and Manual Valves Bronze / Red Brass Excellent